Improve traction wet stamped concrete

Improve traction with NeverStrip Liquid Grip™

NS_SDS_Liquid Grip Step 1

NS_SDS_Liquid Grip Step 2

NS_PDS_Liquid Grip

Liquid Grip improves traction. The project was an outdoor, stamped concrete walkway at an Atlanta church. The church building overhangs the concrete.  “The concrete gets wet and “slippery” whenever it rains” said ServiceMaster’s Mark Jones.
 
The staff fouind the solution online. The goals improve traction and have a higher wet co-efficient of friction.
 

The Solution to Improve Traction

 
NeverStrip Floor Coatings is at  http://www.NeverStrip.com/. ServiceMaster Maintenance Systems of Atlanta Georgia is at http://www.svmmaintsystems.com. They are a NeverStrip Authorized Dealers.
 
Mark Jones of ServiceMaster is available at 404-444-3186. He met with the church and presented the NeverStrip solution. Mark said Liquid Grip improves traction on wet floors.
 
The installation has been in-place for over six months.  Mark told NeverStrip, “the Customer thinks it’s great”.   The ServiceMaster crew described the application, “as a piece of cake.”  Jeff, the Crew Chief, said, “Liquid Grip has made a difference for the church. It has improved traction on rainy days.”

 

The Process

 
The crew cleaned the concrete with NeverStrip Deep Clean™ and rinsed with clean water. Sealing the floor with NeverStrip Stone, Terrazzo and Concrete Seal™ was next. A looped microfiber pad was the tool.   Within 10 minutes, two applications of NeverStrip Liquid Grip (Step 1) was dry.
 
The entire process did not disturb the Church operations.  Liquid Grip improve traction on wet floors.

NeverStrip Liquid Grip

NeverStrip Liquid Grip is a two-step process with Step 1 and Step 2 being applied with a NeverStrip supplied foam roller cover. The use of NeverStrip Stone, Terrazzo and Concrete Seal can be used to first seal more porous flooring surfaces, such as concrete,

 

Liquid Grip is used on any resilient or non-resilient flooring surface.  Unlike many non-slip products in the marketplace, Liquid Grip is not limited to natural stone, ceramics, porcelain or concrete.  It can also be used on resilient flooring such as Vinyl Composition Tile (VCT” and Luxury Vinyl Tile (LVT).

 

Liquid Grip and the other NeverStrip Micron Coatings including: NeverStrip Tile Seal: NeverStrip Vinyl Seal and NeverStrip Stone, Terrazzo and Concrete Seal are all applied Micron-Thin, dry in minutes and low to no odor.  These Micron products can be used indoor or outside.

 

Successful Liquid Grip applications have included showers, locker rooms, pool decks, ramps, stairs and stair landings, commercial office and condo building foyers.

 

Liquid Grip’s wet co-efficient of friction using a BOT 3000E slip meter is consistently greater than 0.80, which exceeds the standard of High Traction Floor established by the National Floor Safety Institute. Go to: https://nfsi.org. Also go to: http://www.neverstrip.com/cms/improve-traction-wet-porcelain/ for a related Post on Liquid Grip improving traction on wet porcelain.

 

Liquid Grip is best cleaned with a soft brush using NeverStrip Micron Clean™.  In most commercial environments, an annual re application is the norm.

 

NeverStrip Floor Coatings

NeverStrip Floor Coatings is a provider of high performance floor coatings to a North American network of Authorized Contractor Dealers. Contact Info@NeverStrip.com to learn more. NeverStrip is a Preferred Vendor Partner of Starnet Commercial Flooring Partnership http://www.starnetflooring.com and FUSE ALLIANCE, https://www.fusealliance.com. These organizations are the two largest North American cooperatives of independent flooring contractors.
For more information contact NeverStrip at info@neverstrip.com.